2000 Jeep Wrangler "ac fan wont stop blowing" Questions

...AC and its not turning on, odds are your refrigerant levels are low, the system will not turn on when low fluid levels are present so the system doesnt burn up the compressor. If your blower motor is ...

...stops blowing cold after 15 minutes or so. it wont blow cold until it sits a while. sometimes the next day. any ideas what i could be. thanks chek that the front fan is blowing when the AC is turned ...

AC and fan wont blow The fan on my HVAC unit will not blow any air. it was working fine but then it just stopped blowing any air at all. If you get a Haynes or Chilton manual, it'll show you how to ...

...ac stop working it has a new compressor that clicks on and off checked the fuses there good but it just wont blow any air out? when you drive on the highway you can feel cool air not hard enough but ...

...ac wont blow cold air Two things are very likely to be your problem. Freon or compressor. Turn on the ac on cold and see if the compressor is engaging, if it is and stops and goes or if it doesn't. ...

...AC only works when the car is in motion. It blows warm air otherwise. Sound like maybe your a/c condensor fan is not working, should come on with a/c on, the fan sit in front or back of radiator, ...

...AC blows warm air when stopped at light. Cooling system is full with 50/50 mix if the fans are not coming on then i would start with that, might be a problem with the fans or with what tells the fans ...

fan will start blowing on high and will continue to blow when the keys are turn off. Other times the dash will put out hot air (when driving) though the temp is turned down to 60 degress and Ac is on.

...wont blow cold air i have replaced compressor dryer and flushed the system and reinstalled new freon any ideas i have replaced ac compressor dryer flushed entire system and refilled with freon the ...

...fan motor all up an it wont turn no more ,heat or Ac they don't make this an impossible repair to do , but it does take some perseverance and time + a new motor and don't forget to fix what caused it ...