2003 Honda Civic "jeep 4 head gasket" Questions

...jeep patroit blown head gasket cost that depends on why, damage is as you find it, on dismantle. just a gasket, is what $35 for the gasket and then labor. both vary by country or town. (google costs ...

...jeep say in europe. ? we dont have WG here.
WG started in Europe in 1999.
on this usa forum or in our country no 3.1 VM diesels
i do have your FSM book.
and here is what it states. ...

jeep 3.7l on cylinder head Hi there: Install the cylinder heads. Use new gaskets and tighten the bolts, in sequence, as follows:Step 1: Bolts 1-8 to 20 ft. lbs. (27 Nm)Step 2: Bolts 1-10 verify torque

...jeep running fine and engine sound is normal, when i checked the computer msg was " cylinder 4 misfire" in different occasions different cylinder numbers, changed the spark plugs, went fine for few ...

...for jeep wrangler 4 cyl. year 97 head gasket Tightening Sequence 8 - 4 - 1 - 5 - 9 7 - 3 - 2 - 6 - 10 Pass 1 - 22 ft/lbs. Pass 2 - 45 ft/lbs. Pass 3 - # 7 - 100 ft/lbs. Pass 3 - All others - 110 ...

Jeep Grand Cherokee, however, this is now 1/4 above the normal (full), something that damaging? You should remove the excess? yes you should remove the access. This will cause the engine to drown in a

...Jeep Grand Cherokee overheated 4 ltr/straight 6; engine overheated resulting in cylinders #3, #4 compression at 30 (other cylinders @150); certain that head gasket needs replacing, but also hear a ...

...Jeep Cherokee 2WD 4.0L MFI : Foot pounds (Final torque) Note: Torque sequence ------------------ front | 12 8 4 1 5 9 13 | of | | engine | 11 7 3 2 6 10 14 | ------------------ Final torque must be ...

...only to the cylinder head gasket. Do not allow sealing compound to enter the cylinder bore. What is the torque specs for the intake and exhaust manifold for a 1997 Jeep Cherokee Sport? 6.. ...

...Jeep is overheating. It has anti-freeze in it, but the temp guage still bounces between 3/4 and all fully hot. Is this going to be the thermostat or a headgasket? Or am i missing any possiblities? ...