1993 Ford Taurus "removing ignition switch 1991" Questions

Ad

...removing the three attaching screws. Disengage the electrical connector from the key warning switch. Using a 1⁄8 in. (3mm) diameter drill, carefully drill out the retaining pin, being ...

Ad

Question about Ford Taurus

2 Answers

...power when turning the key to start it. If there is no power then maybe it was the ignition switch or the wiring in between. A lot of juice goes through the switch and they can burn out after

Ad

...ignition switch from a 1991 nissan pickup? Thanks Image Fig. 1 Ignition Switch Replacement 1. Remove the four upper and lower shell cover retaining screws, then the shell covers. 2.Disconnect ...

...ignition switch? how do I remove the ignition switch on a 1991 volkswagen golf? i had to do this once, you actually have to drill a small hole near the ignition switch to press a hidden button. i ...

...ignition switch from a 1991 ford ranger? there is no hole to a release keeper button. diagram please u must remove the sterering wheel and then the ignition key cylinder lock pin to pull the switch ...

Ignition switch installstion 1991 gmc jimmy I need to no how to remove and install a new ignition switch Thank You Herb remove steer wheel with puller. u will see black cover remove 3 tork ...

Question about Ford Taurus

1 Answer

...ignition switch on an 1991 caprice See Figure 1 Fig. Fig. 1: Ignition switch assembly If equipped with an air bag system, make certain to follow the recommended disarming procedure before, and ...

Question about Ford Taurus

1 Answer

...ignition switch. you need to remove the steering wheel with a puller then remove the screw holding the blinker lever now remove the three screws holding the directional switch you will need a special ...

...ignition switch 2.Check alarm -possible short between ignition switch wires Check the soleniod in the shift lever lock-or the cheap way out is to remove the little square cover directly above the ...

Question about Ford Taurus

1 Answer

...fix remove steering wheel to see what is binding inside. unhook small rod going to ignition switch to eliminate switch as a problem. check ignition switch to see if it is loose. tighten as

Not finding what you are looking for?
1993 Ford Taurus Logo

518 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2001 Ford Taurus
2001 Ford Taurus

2,262 Questions

2000 Ford Taurus
2000 Ford Taurus

2,120 Questions

2002 Ford Taurus
2002 Ford Taurus

1,869 Questions

1998 Ford Taurus
1998 Ford Taurus

1,431 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...