2005 Chrysler Town & Country "ido fuse" Questions

...don`t work from key pad The rear lift door does work.you can manually work the other locks Remove and reinsert the IDO fuse in the fuse box under the hood. This will reset the brain and should

Also the switch on drivers door will not lock or unlock the other doors. Remove and reinsert the IDO fuse in the fuse box under the hood. Remove the IOD fuse and put it back in. It will reset its self

IDO fuse in the fuse box under the hood, and simply put it back in. This resets the electronic problems and seems to allow everything to work again. If the problem reoccurs regularly it may be because

...IDO fuse where is it located? The truck is not starting it has power so battery isn't issue could it be a fusible link? Starter has been replaced so that's not it. Keeps saying TCM combus U0101. ...

window of my 300ce does not work fuse ok and changed the switch in the centre consol what should ido check the motor,take the pad of and give it a bang with a hammer

...ido is the relay or is the fuel pump this is based on a 2.2 from my tech data. Along the line it goes fuel pump m12 then ignition main curcuit relay then engine control relay then to a 5 amp fuse. my ...

...in the fuse panel there is a fuse marked IDO. pull this fuse for about two minutes, then replace. This causes the body control module to reset. This worked for me, hope it does for you. GOOD

...Ido not know much about these fuel injected engines I loved my 1982 fj 60 real simple. Check fuse to your fuel cut solenoid. Fuse box below the steering wheel on left. If fuse good, replace solenoid ...

...fuse for the IDO, pull the fuse for a couple of minutes then replace. this causes the BCM to reset. Ive also heard that if you have this problem and have the rear winshield wiper fuse blowing out you ...

Idoes anyone have answer to I have a problem my 2001 sunfire will not start ...have checked fuses and installed new relay switch any other options I can try? Need a lot more information. Does it crank