2005 Chrysler PT Cruiser "p0344 code" Questions

Ad

...p0344-camshaft position sensor A bank 1 -circuit intermittent p0480- engine coolant blower motor 1- circuit malfunction p063a is not a valid fault code. To find the possible causes of the codes go to ...

Ad

Question about Chrysler PT Cruiser

1 Answer

...code P0344 I have a 2005 Pt Cruiser and the engine light came on the other day and it started to **** really bad when I accelerated. It does not happen all the time. It happened Thursday and then the ...

Ad

...p0344 code coming on and the check engine light is on. The car is maknig a jerking sensation when driving.Also, the car is not accelerating like it use to and the driving conditions are poor. P0340 ...

...code P0344 CHRYSLER - Camshaft Position Sensor Intermittent Interruption Bank 1 Sensor 1Possible causes- Camshaft Position Sensor harness is open or shorted - Camshaft Position Sensor circuit poor ...

Question about Chrysler PT Cruiser

1 Answer

...P0344 code comes right back. The intermitten one this time. I was told to check the wires for a short on the cam sensor I replaced and the crank sensor as well. The camshaft position sensor was only ...

Question about Chrysler PT Cruiser

1 Answer

...code po344 P0344 you have a failed camshaft sensor that is intermittent. There is a TSB that only the dealer can fix they will have to reflash the PCM number 18-15-09, this is the identification for ...

Question about Chrysler PT Cruiser

1 Answer

...I triedd to call up a code but coul not see one. P0344 is camshaft  Position sensor,Dont get confused with the camshaft sensor, You have a timing problem and your solution is the timing

Question about Chrysler PT Cruiser

1 Answer

...Code: P0344 Camshaft Position Sensor Circuit Intermittent Trouble Code Conditions:Engine cranking or running; system voltage over 10.5v. The PCM detected an intermittent loss of the CMP Sensor signal ...

Question about Chrysler PT Cruiser

2 Answers

code P0340 & P0344 car was running then i turned it off to put my key back on chain and tried to start itr again and it wont start These codes indicate a possible camshaft position sensor failure,

Question about Chrysler PT Cruiser

1 Answer

...p0344 i think it was, cam sensor circuit intermittant code. It was idling funny in park. I replaced the sensor and it ran great for about 2 hours. I went to the store and when i came out and tried to ...

Not finding what you are looking for?
2005 Chrysler PT Cruiser Logo

1,118 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...