...remote. I tried reprogramming both remotes a number of times with no luck. The power door locks work good. The exterior keypad on the drivers door works. The trunk release button on the drivers door ...
...remote to the main hand rest., Check for poor connection in the wiring harness specially in the areas of the door hinges where the wires go into the customer control.Also try to find out if any ...
...remote lock on key chain stopped working(both remotes stopped working) also, at the same time the power windows and locks on the passenger side quit working. I can't roll window down or lock doors ...
...moisture may be removed by activating the headlamps on high beam for 15 minutes. If water droplets larger than 1 mm in size have accumulated on the inside of the headlamp lens, the headlamp unit ...
...remote control or is it in the key for door locks alarm?diconnect the battery for 10minutes and try to dry the areas affected by water a blow dryer will help get rid of moisture do it for as long as ...
...seat .Disconnect battery first , Take it out , take the PCB out of the casing , blow all the moisture out , dry it out for a day or so , smother everything in contact cleaner , reassemble , ...
Remote entry keyfob control doesn't work. Batteries are good. Unfortunately theres not a lot you can do with them. If you are sure the battery is OK and the contacts are clean and it still doesn't ...
...randomly comes on alarm should only be activated by remote or key, check your remote... maybe the buttons are faulty, or take it to alarm techy to have the control box checked. could just be
...moisture between the "punch key" and the circuit board which entails taking the remote apart and gently cleaning the back of the rubberized key pad along with the contact areas of the circuit board - ...
539 questions posted
Usually answered in minutes!
161 Questions
164 Questions
125 Questions
87 Questions
43 Questions
