1998 Nissan Frontier "size steering wheel nut" Questions

Ad

...size as a button off your shirt. 2 Slide your hand up the break pedal arm till you find the "hole" I'm referring to. (you'll know it when you feel it) 3 Tape the damn button back into the hole with ...

Ad

size. There are usually several sets of screws with the steering wheel puller. Are you sure you are using the correct screws? There are usually 2 sets of screws with the puller that are the same size,

Ad

...steering wheel with pliers. Place the correct size socket on the retaining nut, and loosen the nut, unscrewing it one turn. 5 Lie back in the seat and prop your knees under the bottom/sides of the ...

Question about Nissan Frontier

1 Answer

...steering wheel 1987 bmw 325 first you need to remove the horn button use a flat screwdriver to pop it out then get the right size socket and remove the large nut you see after the horn button is ...

...steering wheel in place has been stripped. It may be possible to rethread. What is the size and thread count for this nut? Snap-on has thread file's they come in metric or stander each file has 8 ...

normal size is 18mm changed is 19mm on tie rods. also check the condition of the anti-roll bar rubbers as they can cause this problem to. also check the traling arm on the steering this can do this to

...size but rather large maybe T7) from the back side of the steering wheel. Remove airbag assemble . Carefully disconnect the harnesses. Remove the large steering wheel retaining nut. Using a steering ...

Question about Nissan Frontier

2 Answers

...steering wheel pullers at any auto parts store that simplify the task. they cost about 40.00 but also come with instructions that tell you how to do it once you get the airbag removed, the wheel is ...

...steering wheels are a "press fit", (very tight) but after removing the large nut, in many cases, you will see three vacant threaded holes, find the right size bolt and thread to fit these holes and ...

...steering wheel vibration between 30 and 40 mph. I checked the u joint,wheel alignment, and wheel balancing and they are ok. What else could it be?? Thanks bent alloy, bent steel rim, broken belting ...

Not finding what you are looking for?
1998 Nissan Frontier Logo

639 questions posted

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...