2003 GMC Yukon Denali "transfer case problems" Questions

transfer case problem on 2006 gmc Denali. When I turn selector 4wd drive, light flashes for a few seconds then hen goes out. The same on the other settings.. speed may be a factor, try pushing the ...

problems transfercase stays on the shaft going to front axle stays on If you have locked hub drive in the front end then that shaft will be turning all the time when moving as the front wheels will be

...Transfer Case - NVG 149-NP (One Speed Automatic) - SUV 2004 TRANSMISSION Transfer Case - NVG 149-NP (One Speed Automatic) - SUV TRANSFER CASE NO FRONT DRIVE Transfer Case No Front Drive Cause ...

transfer case problems 2007 Dodge Nitro Recalls - Cars.com www.cars.com/recalls/dodge/nitro/2007/ Cars.comLook up all NHTSA vehicle safety recalls for your 2007 Dodge Nitro, and contact ...THE ...

...transfer case was bad but even when transfer case is in neutral it still wont move. Is it something in the transfer case or a torque converter issue? Could be either, a transmission problem or ...

...transfer case The transfer case problem is very much noticed by other Oldsmobile bravda users. Oldsmobile technical service bulletins (TSBs) report that second and third generation Bravada models ...

transfer case wont engage in any range why? it sounds like a linkage problem ? first check fluid level in transfer case , then remove linkage and try to engage transfer case manually , if it does then

transfer case and recently the old transfercase broke so I bought another manual 241 c I have it all in but the pickup will nt move when I put it in any of the drive gears nor reverse and when I shift

...transfer case. It is making a clicking noise. Any suggestions? I am very capable of performing the labor, just not flush with cash to throw money at the problem. Planning on pulling transfer case ...

...transfer case motor can be tested with an OHM METER .I have had customers with transfer case motor problems before and the solution to thier problem was almost always a bad ground from the frame to ...