2000 Ford Windstar "power locks" Questions

The power door lock is not working, I have tried to change the power lock which is connected with the door latch, check the fuses When you were in there to change the lock actuator at the door latch, ...

...power door locks only work when key is turned on 1999 Ford Windstar power door locks only work using the driver door switch when the key is turned on. When key is off, only the driver door lock will ...

power door locks my 2001 ford windstar the power door locks dont unlock all the time.the driver door won't unlock but i opened the door panal and the actuater seems to move some but sometimes the ...

...power locks in my 2000 Ford Windstar I have a 2000 Ford Windstar. Whenever I hit a bump in the road you can hear the power locks. I was wondering what I could do to fix this? Someone told me I could ...

...power door locks on the doors that won't lock are messing up or you reciever for the remote is going bad and not sending power to them doors. try and lock the doors from the drivers door and see if ...

...Power locks). When pulling the handle either inside or outside with doors unlocked it won´t open. Sound like you have a dammaged door latch assembly. It is a pain but you have to take the insid ...

1999 windstar power steering makes buzzing noise when warming up. drain all power steering fluid and replace with dextronIII/mercon transmission fluid start the vehicle and turn the wheel back and ...

...power door locks do not work and have checked every fuse The actuactors for your locks have a little motor in them. In this motor there is a resistor that will give out over time. Usually the locks ...

power door lock sticks. sometimes unlocks, power door lock sticks. sometimes unlocks, sometimes doesn't on drivers front & back make sure linkage is not sticking, if everything is free moving then

...locks are not moving. Its killed the battery, so would it be a short ? or is there a fuse that I can just pop out so it doesnt kill the battery all the time? # 37 fuse is for the power lock motors, ...