2000 Ford Windstar "edge turn hazard lights" Questions

Ad

Question about Ford Windstar

1 Answer

...edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel. The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard ...

Ad

...edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel. The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard ...

Ad

Question about Ford Windstar

1 Answer

2007 Edge rear brake lights, turn signal and hazard lights do not work but bulbs are good. could be a fuse or the brake light switch is bad.

...turn signal fuse, (not the flasher), is the 7.5 amp fuse that is kind of by itself, very close to the front edge of the underdash fuse box. It is a little hard to see, since it is so close the the ...

...edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel. The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard ...

...of the clamshell into the seats on the connecting trim panels. Test the turn signals, head lights and hazard flashers before driving the Expedition. VDM AUGOCOM H8 Multi Brand Truck Diagnostic ...

...turn signal flasher is no where to be found under the dash. Any ideas where it is hiding? The flasher is a small round plastic cylinder (unless replaced with a metal one) behind the left edge of the ...

...turn signal and hazard warning flashers are mounted on the fuse panel. REPLACEMENT To remove a relay, simple pull the relay out. When installing a relay, make sure the terminals on the relay line up ...

Question about Ford Windstar

1 Answer

...edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel. The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard ...

...is puts the r/h/s parking lights and, when I turn the ignition on again the indicator is still flashing. HELP? Bad ignition switch or indicator switch. Either that or you have a major short

Not finding what you are looking for?
2000 Ford Windstar Logo

2,289 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Windstar
1998 Ford Windstar

1,797 Questions

2001 Ford Windstar
2001 Ford Windstar

1,796 Questions

1999 Ford Windstar
1999 Ford Windstar

1,174 Questions

2003 Ford Windstar
2003 Ford Windstar

996 Questions

1996 Ford Windstar
1996 Ford Windstar

582 Questions

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...