Question about Chevrolet Cavalier
light ( wrench) they are just stored in the bcm memory ! DTC B2532 DTC B2533 DTC B2558 DTC B2600 DTC B2601 DTC B2602 DTC B2603 DTC B2624 DTC B2625 DTC B2662 DTC B2947 DTC B2948 DTC B2957 DTC B2958 DTC
Question about Chevrolet Cavalier
...light All these functions are controlled by the BCM - body computer ! The door ajar switch is an input to the BCM . Your problem could very well be a door switch , does the light work when you open ...
...BCM acting up. Remove the door jam switches and inspect. Disconnecting the switches should make the lights to go out...Hope this helps. Possible that the roof light switch or one of the door switches ...
Question about Chevrolet Cavalier
...BCM AND NOW MY AIR BAG LIGHT STAYS ON, AND SETS CODE B0055. WHAT DO I NEED TO DO? Hi was the BCM a used part or new? If used there may be crash info stored in from previous car. Or the airbag ECU is ...
Question about Chevrolet Cavalier
...BCM is wired to the Class 2 serial data communication bus as well as discreet input and output terminals to control the functions of the vehicles body ! Now then Karen what problem is your vehicle ...
...BCM does not communicate with code reader. The code reader was connected to the car but did not communicate. Problems are no brake lights, third brake light not working, no blinkers, ABS light always ...
...light will not go off untill i remove the fuses... I am at a loss..... please can you pass on some advice? Used to, this would be an obvious case of a bad headlight switch. Now with all the extra ...
Question about Chevrolet Cavalier
...bcm fuse The shifter release solenoid is activated by the brake light switch. Check to see if the brake lights are working when you press the brake pedal. If not, that may be the reason why the ...
...BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s) ...
...light illuminates with the headlight switch on. ---- Also check the wires, and check the fuse for your low beams. could of blown a fuse on your lows, but your highs will still work. Every single time ...
1,907 questions posted
Usually answered in minutes!
1,849 Questions
1,641 Questions
1,529 Questions
1,438 Questions
1,200 Questions