Question about Cars & Trucks
...determine when the piston is a top dead center. You will then have to determine if both valves are closed. I have used a spark plug adapter with a supply of low pressure air to see if there is any ...
Question about Nissan Xterra
...a toyota 22re from scratch how do you determine top dead center on the compression stroke Compression stroke is when the intake valve closes and the piston starts down from the top of the
Question about Nissan Xterra
...determines when top dead center compression of the #1 cylinder occurs and the convertsit into a pulse signal that is sent to the pcm , then the pcm uses it to determine the correct injection
On that engine the ecu reads the crank and cam sensor on startup to determine top dead center and controls the ignition timing and advance from there.. There is no distributor and no timing adjustment
determine top dead center for all cylinders by using the Crankshaft Position sensor 24X signal alone. The Camshaft Position sensor 1X signal is used by the PCM to determine if the cylinder at top dead
Question about GMC Cars & Trucks
...again, and determine where compression begins again. Turn the engine to top dead center again and look to ensure that the rotor is in the proper position. That should get you close on the
Question about Cars & Trucks
...determine when the #1 cylinder is at top dead center. At that time the timing mark should show top dead center also if you can find it. Then remove the distributor again and point the rotor at the #1 ...
On that engine the ecu reads the crank and cam sensor on startup to determine top dead center and controls the ignition timing and advance from there.. There is no distributor and no timing adjustment
Question about Cars & Trucks
how to determine top dead center on number one cylinder with crankshaft timing mark really need make and size of motor
...determine the top center of the piston by putting a long screwdriver inside the empty spark plug hole. The piston should push the screwdriver all the way out if the piston is at the "top" ...
397 questions posted
Usually answered in minutes!
568 Questions
522 Questions
422 Questions
289 Questions
259 Questions