2003 Nissan 350Z "remover pump cover" Questions

location of fuel cutoff switch in a 2003 nissan 350z There is no fuel cut off switch. The electric fuel pump only operates for a few seconds when the ignition is switched on and will only remain on ...

gas is getting in my oil in a 350z Nissan. what should I check or could it be my computer telling injectors more gas car cranks right up and idles and drives good checked oil 3 times but still gas ...

...pump cover screws, and lift off cover. Remove pump rotors. Wash all parts in a suitable solvent and inspect carefully for damage or wear. Oil Pump Assembly Assemble pump, using new parts as required. ...

...pump cover bolts. Remove the oil pump cover. Mark the inner and the outer gears in relation to the oil pump housing. Remove the inner and the outer oil pump gears. Remove the oil pump pressure relief ...

...pump screen and cover bolts and the (B) oil pump screen and cover.4. Remove the two oil pump bolts and the oil pump.INSTALLATION1. Clean and inspect the mating surfaces.2. Install the oil pump and ...

...PUMP SCREEN AND THE TUBE REMOVE FRONT COVER REMOVE TIMING CHAINS REMOVE CRANKSHAFT TIMING GEARS REMOVE OIL PUMP.WHEN INSTALLING NEW OIL PUMP AND OIL PUMP SCREEN AND TUBE TORQUE BOTH 89 INCH POUNDS. ...

...pump and cover mounting bolts and nuts. Remove the water pump and cover as an assembly. Separate the two pieces after removal. Clean the mating surfaces. To Install: Install the water pump cover to ...

...cover (45455) forward until the fuel pump assembly access plate is visible. Remove the four fuel pump assembly access plate screws, the ground lead, and the fuel pump assembly access plate from the ...

...cover. Inspect oil pump body seal (6C639), oil pump and filter body and engine front cover for distortion and wear. Replace components as necessary. Installation Position oil pump and filter body on ...

...pump cover retaining screws from the timing cover. Lift off the oil pump cover. Remove the pump rotors. Wash all parts in solvent and inspect carefully for damage or wear. To install: Clean all parts ...