2003 Nissan 350Z "light" Questions

tail lights and fog lights Tail lights and fog lights werent working, took it in mechanic switched around low beam and fog lights relay (supposedly what he did as too what he told me) lights worked ...

xenon lights blown fuse My 350z has xenon lights, the xenon light on the passenger side keeps shutting of due to a blown fuse. I replace the blown fuse with a new one, turn the lights on and ZAP!!! ...

my tail lights don't work but brake lights do, what's the problem? my tail lights don't work but brake lights do, what's the problem? Check your fuses to make sure they are OK.

both my tail lights went out and my turn signal doesn't work when i flick it to the left nor does my hazard lights. however, my front light and right signal work but not when i press the hazard. i've ...

...box layout Battery drains after a day not driving Could be a parasitic drain like the underhood light, trunk light, floor light, map light, etc. not turning off correctly, something left plugged ...

...for the battery to die after 2 weeks of not starting up the car it happened a couple of times no lights were left on Depending on your battery, no it's not common. If your battery is newer, then ...

fuse layout Cabin turn signal not working Hi QQ, a 12 volt circuit light will be what's needed, turn the drive lights on and put the circuit light over the fuse box and work from there. Cheers Greg.

How do I get to the reverse lights on my 2003 350z. I need to replace my right side reverse light Open your trunk and you will see some twist off caps holding the light assembly in. Unscrew them and ...

350z map lights (2) are not working These are the lights located on the inside front roof. Both lights are out. Is there a fuse for these by chance? It seem doubtful that both would fail. you have a ...

...schematicsdiagram i need to see which fuse controls each function G'day Steven, a 12 volt circuit light will be what's needed, turn the drive lights on and put the circuit light over the fuse box. ...