2005 Ford Taurus "reset computer" Questions

...reset computer after repairs. emissions testing says computer hasnt reset the codes. It is called an OBD2 drive cycle, and it reset the system after the battry has been disconnected or the system ...

...had an oil change done. service engine light needs to be reset, don't know how to do it You can try to disconnect your battery for about 5 minutes and that will usually reset the

...sits flush in its seat then reset the computer by disconnecting the ground cable on the battery for 30 seconds.If all fails you will need to replace the IAC valve and reset the computer

door are closed the problem is going to be with on of the door switches. Had same problem. Unhook the ground cable from the battery for about 15 minutes and this will reset the computer. Worked for me

...reset it? Take the car to Autozone or similar business that offers free scanning of the car's computer. If the computer has no problem codes, then the scanner can turn off the light. If the computer ...

reset the computer, but if your car will not start because of it you may have to to disconnect the battery for 5-10 minutes reconnect an cycle the key on an off 3 times. this should solve your problem

2000 ford taurus want pass emissions test,reset computer, how many miles should be driven to clear it. it varies, sometimes it may take 1-2 weeks. why was computer reset?

...reset the computer and see if the light comes back on. you may have already fixed it. to reset the computer take the positive cable from the car off the battery and give it 3-5min to discharge then ...

have changed the egr soilnoid on and checked the valve and its working what should I do next? Have you had the code reset using an OBD 1 scan tool? It must be reset as the code remains in the computer

2004 Ford Taurus 3.0, low oil light came on, car was not running right. put oil in(2 quarts) now car will not start. Do we have to reset the computer in order to get the car to run? Reset it to what?