2003 Ford Taurus "replace wheel bearings drive 03" Questions

Ad

...replace the half shaft. Please help! right or left side? Use 3 wheel nuts in order to attach the J 42129 to the wheel bearing/hub. Use the J 42129 in order to push the wheel drive shaft out of the ...

Ad

Question about Ford Taurus

2 Answers

...fixed. It made it when I got up to speeds around 60 mph, but no lower. It was my caliper. Drivers side, front. my 03 did the same thing. I replaced the front wheel bearings and the humming went

Ad

Question about Ford Taurus

1 Answer

...wheel bearings. I've had to replace both sets since I bought the vehicle. I found out that they tend to wear through wheel bearings. I also found out that they have strut issues as well. The O.E. ...

...opposing side wheel the sound will go away until you go into a straight line.They will usual take a stethascope while the car is on the rack and place it in drive to pin point the bearing.Good

Question about Ford Taurus

9 Answers

...wheel bearings and replace the front brake pads also. FROM: LustyKid Burnt smell can be possibly from slipping power steering belt. Re-adjust tension, but look to see if the belt looks good. If ...

Question about Ford Taurus

3 Answers

...Replace Front Wheel Bearing and Hub Assembly) Models: 2002-2004 Buick Rendezvous 2002-2004 Chevrolet Venture 2002-2004 Oldsmobile Silhouette 2002-2004 Pontiac Aztek, Montana with All Wheel Drive ...

...recomment steering angel sensor. Please show me how to replace and reset and i need any special tool to replace steering angle sensor? check/replace wheel bearings check replace disc pads and ...

Question about Ford Taurus

4 Answers

drive, please help Ok, there are sensors on your front wheel hubs. This could easily cause the abs light to turn on. The loud noise could easily be your wheel hub going bad. Easiest way to check, jack

Question about Ford Taurus

1 Answer

...wheel bearing on a 03 ford transit 280 That doesn't mean you have to go out and buy a 37 mm wrench, the nut should be finger tight, if not a pair of channelock pliers will do. The nut just snugs up ...

...wheel bearings. After the "wish bone" busings were replaced, was the car re-aligned? If the toe-in is not correct, it can cause the condition you describe. Be very carful driving until you root cause ...

Not finding what you are looking for?
2003 Ford Taurus Logo

1,790 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2001 Ford Taurus
2001 Ford Taurus

2,262 Questions

2000 Ford Taurus
2000 Ford Taurus

2,120 Questions

2002 Ford Taurus
2002 Ford Taurus

1,869 Questions

1998 Ford Taurus
1998 Ford Taurus

1,431 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...