2002 Ford Crown Victoria "holder" Questions

Ad

I dont know how many other components are in the system or their locations First check out the fuse holder that it is clean and tight, and the fuse ,I have had the odd one that goes open circuit under

Ad

Question about Ford Crown Victoria

1 Answer

...fuse, # 25 in the fuse box. If this is ok then check there is 12 volt to the middle of the lighter holder with the ignition on. Check that the element on the lighter it's self is ok and not broken. ...

Ad

...and defrost but not my vents whats is wrong and how do i fix it? Check the hoses underneath the cup holder area under the dash and make sure theres no obvious hoses disconnected. If they are ok, more ...

...Turn head away as you slide off the hose on the tank side of filter.  Install new filter in holder,attach hoses and install new clips then tighten hold-down clamp. (:^)  ...

Question about Ford Crown Victoria

1 Answer

...the rear light cover and turn on the rear light and touch a wire from any metal service to globe holder if it lights the globe then fir a wire to any light to earth and every thing should

Question about Ford Crown Victoria

1 Answer

1990 Ford Crown Vic Serpentine Belt Problem On my 1990 Ford Crown Victoria I recently had to change the serpentine belt (2nd pulley on this model) that routes around the compressor, crankshaft, and ...

Question about Ford Crown Victoria

2 Answers

2000 Honda Odyssey Coin Holder Is there a way to remove the coin holder? At times the coin holder has been used as a tray and some papers have slid behind... and I need to retrieve them but can't ...

Question about Ford Crown Victoria

1 Answer

cup holder is stuck down the cupholder is stuck down stick your hands in the cup holder, press against the sidewalls of the cup holder and pull up, there are only 2 metal clips that hold the cup ...

Question about Ford Crown Victoria

1 Answer

...On some models you may need to use a flat bladed tool to lift up the lock claw and disconnect the holder from the cap. Separate the wires at the grommet. Make sure to remove the spark plug wires ...

...Napa, wont come on, remove 40 amp fuse #10 slot, fuse good, 12 volts from battery to one spade in holder, not on second spade in holder, Next? of course no voltage on the second spade holder

Not finding what you are looking for?
2002 Ford Crown Victoria Logo

273 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...