...engine. About 18" long and 2" in diameter. It has the oil lines and the coolant lines running to it. Remove it, it can be disassembled and cleaned. there are a lot of fins in it and they clog easily. ...
...engine oil cooler lines? This should be a straight forward swap to a new line. Loosen fittings, remove clips, unscrew retainer on block and drain oil from old line to avoid messy spills and replace. ...
lbs.) . Tighten transmission oil cooler lines to fittings to 25-28 Nm (18-21 inch lbs.) . Tighten power steering/transaxle oil cooler and splash shield retaining screws securely. Refill engine coolant
engine oil cooler in the radiator.there will be lines that come from the transmission to the radiator that are considerably smaller. Hello: Look on the back side of the radiator (toward the engine) If
Question about Cadillac Cars & Trucks
...engine to the radiator to the oil cooler. we want to to eliminate the oil cooler all together,is that possible Is my question. PLEASE HELP!! I'm starting to lose my mind because of this car Did you ...
...oil cooler inlet fitting. 7. Remove nuts retaining A/C condenser core to the radiator. 8. Disconnect engine control sensor wiring from the auxiliary electric cooling fan motors and the CCRM. 9. Raise ...
...engine oil cooler lines from the right radiator end tank. Disconnect the transmission oil cooler lines from the left radiator end tank. Remove the left and the right engine torque struts.Remove the ...
Question about Ford Crown Victoria
...oil cooler inlet fitting. 7. Remove nuts retaining A/C condenser core to the radiator. 8. Disconnect engine control sensor wiring from the auxiliary electric cooling fan motors and the CCRM. 9. Raise ...
...engine block to the oil cooler on the radiator The oil lines going to the radiator is your transmission cooler lines, you will look for a smaller radiator and its connections, usually connected using ...
Engine oil cooler hose: The engine oil cooler hose connects the oil cooler to the engine. If the hose becomes damaged or develops a leak, it can allow oil to escape. To determine the source of the oil
273 questions posted
Usually answered in minutes!
454 Questions
486 Questions
323 Questions
297 Questions
294 Questions
