2001 Ford Taurus "remove shifting cable" Questions

Ad

...shifting is due to a poor adjustment where the lever does not travel as far as it should. first step is to remove the cable from the shifter bar. then move the shifter bar to the park position ...

Ad

...? it almost feels like the shift lever is bent If you remove the plastic around the steering colum you will see a little cable that hooks to the park lever, there is an adjustment ion this ...

Ad

...remove the housing from around the column it just bolts and snaps together you should see a cable that runs to the bottom of the speedo to the column try adjusting this cable to where the reading is ...

...shifting) Some say it is probably a relay box where the shift cable attatches. (Apparently this is a common problem) But I can't seem to get it iff. I have removes 2 8mm bolts. and a 13mm nut ...

...shifting cable at the linkage it has come apart and rubber on bolt is real brittle If shift cable is the problem, can you replace it? My biggest problem is I can't see anything from here. Maybe you ...

cable. Place the shift selector into NEUTRAL . Remove the air cleaner outlet tube and the air cleaner housing from the vehicle. Detach the electrical connector from the TR sensor. Remove the retaining

Question about Ford Taurus

1 Answer

...cable, wait for at least 1 minute for the SRS or air bag module to deplete its energy. Place the front wheels in the straight-ahead position. Lock the steering column. Remove or disconnect the ...

...cable. Disengage the neutral start switch electrical connector, then remove the shift control lever on top of the switch. Remove the two neutral switch attaching bolts, then remove the switch. Fig. ...

Question about Ford Taurus

1 Answer

...transmission sensors Inside the pan remove it and you will find all the selenoids and if you mean the shift module then it is located on the outside of the trans it would be what the cable is hooked ...

(PCM) Removal and Installation Disconnect the battery ground cable. Remove the powertrain control module (PCM) electrical connector. Remove the PCM. Remove the stud bolts. Remove the cover and the PCM

Not finding what you are looking for?
2001 Ford Taurus Logo

3,503 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2000 Ford Taurus
2000 Ford Taurus

2,121 Questions

2002 Ford Taurus
2002 Ford Taurus

1,869 Questions

1998 Ford Taurus
1998 Ford Taurus

1,431 Questions

1996 Ford Taurus
1996 Ford Taurus

1,365 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...