...this? Can I get a diagram? Please help- Charles these are known as cradle bushings. the frame around engine is called the cradle. you can get mounts from ford should just replace these and be ...
engine cradle as an assembly out from underneath the car. Then the transmission can be removed from the engine, after which the engine can be removed from it mounts. It's not project for the timid
Question about Ford Taurus
...pointers first. If you are doing it at home just drop cradle with engine and transmission then separate while it's on the floor. If not you are going to need special tools and equipment plus a
...engine cradle cause the control arm was riped away due to pot holes. The rough idle and engine light are most likely related. Go to Auto Zone and have them pull the codes for the check engine light. ...
...stand to hold it in place safely while your remove the engine cradle. If you don't have tall jackstands and an engine support, don't even think about doing this on your own. It's simply not
Question about Ford Taurus
...engine cradle bolts on that side and drop the cradle down enough to bet the ball joint stud into the control arm. Ford engineers should be shot for this bad design. ...
...seek a good transmission shop, this is most likely going to be the torque convertor. it has come apart on the inside. to get these trans out, you need to unbolt the entire cradle and hang the
...engine out? I've used 3 different brands of stop leak but it didn't help. It leaks out about a gallon a month or a drip every 6 seconds. Thanks, Jay Nope. You can lift the car and drop the cradle and ...
...ENGINE. THANKS. You need to loosen one side of cradle & rotate out of way Really need a lift for a transaxle removal on any vehicle Have to have tool to support the engine & drop trans out ...
3,503 questions posted
Usually answered in minutes!
2,348 Questions
2,121 Questions
1,869 Questions
1,431 Questions
1,365 Questions
