1996 Ford Explorer "ball joint" Questions

...ball joint press. The ball joints are a part of the upper control arm. So you have to replace the upper control arms. On 2006-07 models, the upper ball joint is not replaceable. If defective, replace ...

...ball joint and a pivot ball joint. The pivot joint gets minimal wear. To check the load ball joint, jack up the wheel to be checked. With about an 1" of clearance off the ground, place your hand on ...

...ball joint (1994 Explorer 4 Wheel Drive with the Manual Locking Hub.) Ball joints are pressed in. Upper ball joint also has and eccentric to the stud which is not threaded. The lower ball joint has ...

...ball joint, and once the steering knuckle is free of the ball joint, have at it using whichever means you choose to get the old one out. What year and 2 wheel or 4 wheel drive? how do you get the ...

I have a 1996 Ford Explorer and just replaced ball joints on both front sides due to it making a loud squeaking noise when I turn and hit a bump but is still making the noise.... any clues? check your

...ball joint torque specs 2002 explorer xls 4x4 4.0L v6 gas Need torque specs for upper ball joints. It's a 2002 Explorer XLS 4x4 4.0L V6 gas Douglas, 90 lb-ft is ball joint nut torque. Check the ...

...ball joint are pressed in , there is a tool to remove them called a "BALL JOINT PRESS" so with the tool u don't need to remove the control arm, which is a huge job on the 4 wheel drive model. here is ...

in getting upper ball joints do i need to get the whole assembly are just the ball joint? if they sell just the ball joints then your on a winner ,its cheaper

...snap ring from the lower ball joint and hit it out with a hammer. You will need a ball joint press to install the new ball joint. Let me know if you have any questions. Thank you for using

...ball joint and axle nut please? Hi Robert,here's a link on your upper ball joint repair guide,also join their site,become a member,it's free,then you can use all their repair guides like me. Repair ...