1992 Ford Explorer "revit" Questions

cant get the radiace arm bushing on how do you get apart You need to remove the bracket it goes into in order to replace the bushing, remove the nut on the raduis arm and then remove the bracket to ...

I have heart stints, is it safe to use Revitive. The stints were placed in 2001. ask your doctor not some website https://us.revitive.com/help-info/contact/ Ask your Doctor to advise you. Contact ...

Which rivits need to be removed to take out the RH window motor? There are four rivits in the door around the motor assembly of my 1992 Thunderbird passenger door. Do all four need to come out? My ...

...broke if its the handle replace it remove screww holding it and install new one, some are held with revits, drill revit to remove,use screws to reinstall. hope this helps. you will have to remove the ...

...and it's held with one rivet near the bottom of the door and the new actuator will come with a new revit. With the door panel removed and you reached around and made sure that your on the right one ...

hi my 1998 5.7 misses on 2 4 6 8 cylinders random revit and black smoke runs rough at idle new plugs wires cap rotor maybe check that the shaft isn't bent in the distributor

my windows wont go down. i have checked the fuses under the hood but there are 4 little covered boxes that I don't know what they are It is not uncommon for the window motor and regulator to go bad in

I have a 2001 chevy blazer and am replacing the upper ball joint. It looks like there are pressed in revits, do I drill them out? Or do they need to be broken out with some type of splitter? Yes you ...

when letting down the drivers window,their is a rubber sqikkey sound your rubber is drying out. do not use armor all unless u are going to use it weekly. use a graphite lube as it will help to ...

driver side exterior door handle broke. just one arm broke off the handle, so its still half on but i can't open my door from the out side. can i use the back door handle to replace the front one? ...