...real code from the computer. Ignition switch should be on with engine off. Locate the black RABS II diagnostic connector. Disconnect the two halves. Attach a jumper wire to the black with orange ...
...Diagnostic trouble codes (DTCs) may not be displayed for approximately 30 seconds after the ignition switch is placed in the RUN position. This is the amount of time the air bag diagnostic monitor ...
...CODES. BEFORE TURNING IGNITION OFF EXIT SELF DIAGNOSTIC.BY PRESSING DEFROST BUTTON EXIT THE SELF DIAGNOSTIC PRESS BLUE BUTTON. IF ALL FAIL LET A GARAGE CHECK IT OUT.BUT ALSO CHECK COOLANT SYSTEM IF ...
Diagnostic Trouble Code) stored in the ECM (Engine Control Module). You'll need an OBDII (On-Board-Diagnostics) scanner to retrieve any codes recorded/set in ECM. Once you do this and let us know what
...free. Will tell you if code are hard or soft. Codes can only be cleared with diagnostic tester. Once cleared, re-ckeck for problem code and replace part. May have faulty ecm or bad ground
...diagnostic trouble codes (DTCs), erase the continuous DTCs, and carry out the self-test diagnostics for the instrument cluster. System passed, retrieve and record the continuous diagnostic trouble ...
find engine codes for a f150 5.4 truck OBD codes for a 2004 5.4 triton engine in a f150 What is the fault codes that you have there? Note the code number and send us for other diagnostic details.
...codes p1351 and p1343 misfires The code 1351 is a problem with the ignition diagnostic circuit, and code 1343 is not a common code for Ford products in the US.It may have something to do with the ...
What is a 34 code for 1989 ford f150 Code 34 Ford OBD Diagnostic Trouble Codes
...diagnostic trouble codes (DTCs), erase the continuous DTCs, and carry out the self-test diagnostics for the PCM. If the DTCs retrieved are related to the concern, go to the Powertrain Control Module ...
1,474 questions posted
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions