2005 Ford Expedition "blend door actuator" Questions

Ad

...blend door actuator went out. i replaced it and everything works great for a couple of weeks. then loud clicking noise came back. i removed blend door so i can get a replacement. however, with no ...

Ad

...blend door if the heater hoses are both hot its a blend door actuator, and possably the blend door its self, the way to make sure is to feel around under the dash . feel the black hvac box and if its ...

Ad

Question about Ford Expedition

1 Answer

...would swing to allow the holes to align but to no avail. What do I need to do? Thanks, Bob the blend door itself is probably bound up... you should be able to manually operate the blend doors by

...blend door actuator faulty, or a faulty blend door. This door switches from hot to cold vents. On expeditions equipped with rear AC front and rear AC have seperate actuators. Hopefully this

...blend door 3 ? Headliner airflow 4 ? Auxiliary mode door 5 ? Floor airflow 6 18476 Heater core 7 19860 Evaporator core 8 19805 Blower motor The auxiliary A/C and heating system has the following ...

Question about Ford Expedition

1 Answer

blend door actuator on a 99 expedition how do you remove and replace it thanks In order to replace the blend door actuator motr dribe u must remove the entire dash assembly, I strongly suggest buy a ...

...blend door actuator but I can't find it. I need to no where it is and how to fix it. I also was told I can stick something in there and turn it and if it starts working that's the problem but ...

blend door actuator located in the front heater box may not be working. The actuator (a white square device that measures about 2 1/2" square and 1/2" thick) is mounted on the bottom of the heater box

...blend door is not working. Manual A/C The manual climate control system heats or cools the vehicle interior depending on the function selector position and the temperature selected. The function ...

Question about Ford Expedition

2 Answers

...blend door actuator for the rear HVAC. It is not uncommon for the actuator to break or the shaft on the blend door that the actuator controls. You'll need to remove it and inspect the part that mates ...

Not finding what you are looking for?
2005 Ford Expedition Logo

962 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Expedition
2000 Ford Expedition

2,188 Questions

1999 Ford Expedition
1999 Ford Expedition

1,825 Questions

1998 Ford Expedition
1998 Ford Expedition

1,627 Questions

2003 Ford Expedition
2003 Ford Expedition

1,696 Questions

2001 Ford Expedition
2001 Ford Expedition

1,161 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...