2004 Ford Taurus "starter solenoid" Questions

Ad

...solenoid / starter. I would suggest that if you know the battery has good voltage, you clean the terminals & reinstall lthem. If you have full voltage at the battery & a good connection then ...

Ad

Question about Ford Taurus

1 Answer

solenoid and or starter? If I buy a new starter, will it come with solenoid mounted? Car has 3.0 duratec engine. Thanks for any help. all I had to do on a sable was to replace the belt but look at the

Ad

...starter solenoid, if no neutral or brake switch is involved. It is sometimes located ON the starter. It activates a high-current switch that engages the starter. If you don't hear a click, the ...

Question about Ford Taurus

1 Answer

...not responding. It could be worn brushes in the starter or bad contacts in the solenoid itself. If it is just a soft click, the relay for the starter solenoid is working but the solenoid is ...

...starter solenoid. Follow the heavy duty copper cable from the starter back to the battery. Now, if there is metal can that is bolted to fender panel or there abouts. This can has two heavy duty wire ...

Question about Ford Taurus

1 Answer

...starter selenoid SOLENOID REPLACEMENT Remove the starter motor, as described in this section. Remove the positive brush connector from the solenoid motor M terminal. Unfasten the solenoid retaining ...

...starter solenoid that is stuck on. Older fords had this solenoid or relay located on the passenger fender apron, but I think on your '95 model, it is located on the starter motor itself. There are ...

starter solenoid contacts are burned, replace the starter. Actually...tapping it sometimes needs to turn into wacking it. Seriously..... Also, to check and see if it is faulty, you can "clack it" with

...starter motor, as described in this section. Remove the positive brush connector from the solenoid motor M terminal. Unfasten the solenoid retaining screws and remove the solenoid. To install: ...

Question about Ford Taurus

2 Answers

...starter solenoid (11390) is hot at all times. Make sure the protective cap is installed over the terminal and is reinstalled after repairing. Disconnect the battery ground cable. For additional ...

Not finding what you are looking for?
2004 Ford Taurus Logo

1,707 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Ford Taurus
1999 Ford Taurus

2,314 Questions

2001 Ford Taurus
2001 Ford Taurus

2,217 Questions

2000 Ford Taurus
2000 Ford Taurus

2,061 Questions

2002 Ford Taurus
2002 Ford Taurus

1,832 Questions

1998 Ford Taurus
1998 Ford Taurus

1,403 Questions

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...