2004 Ford Taurus "brake bleeding" Questions

Ad

Question about Ford Taurus

1 Answer

The brake pedal goes to the floor and I can not get them to pump up. I just changed my master cylinder. So, I presume that you had brake pressure before the MC change, ....? What you need to do first ...

Ad

Question about Ford Taurus

2 Answers

...MASTERCYLINDER BUT STILL GOING TO THE FLOOR Any time the internal pressurizable portion of the brake system is breached, i.e. bad seals, broken lines, replacing ABS or master cylindar or blown ...

Ad

air in the brake line ,bleed brakes ,replace pads still air in the brake line ,after all this bleeded brakes ,replace pads and replace master cly.l Please Check Fluid flow Divider Valve & Servo ...

...Bleeding The Brake System Bleeding When any part of the hydraulic system has been disconnected for repair or replacement, air enters the lines causing spongy pedal action (because air can be ...

WHY DO YOU HAVE TO PUMP THE BRAKES AFTER INSTALLING NEW BRAKES PUT ON NEW BRAKES AND THEY SEEMED SLOW TO STOP No, but it is best to bleed the brake lines to remove any air that was let in during the ...

stopping the brake pedal very hard several times and see if this will free up the valve. if this doesnt work valve may require replacement and further bleeding. i hope you find this information useful

...brake lines, pedal still soft. What else can I check? There is a special tool required to bleed the brakes, it plugs into the ABS hydraulic control under the hood and holds the ABS valves open to ...

brake fluid and undo bleeding nipples one at a time OR the other way 1 person in car 1person filling tank with b/fluid while you get under car a open bleeding nipples 1 at a time starting at the L/H/F

...whi.le you add brake fluid all the while when needed.Do not EVER let the master cylinder go dry while bleeding this way(the old fashioned way) Protect your eyes while bleeding ...

...brake lines at the M. Cylinder.Bleeding the brakes is a 2 person operation.  You always bleed the brake the farthest from the master cylinder, then the next, the next, and finally the drivers ...

Not finding what you are looking for?
2004 Ford Taurus Logo

1,707 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Ford Taurus
1999 Ford Taurus

2,314 Questions

2001 Ford Taurus
2001 Ford Taurus

2,217 Questions

2000 Ford Taurus
2000 Ford Taurus

2,061 Questions

2002 Ford Taurus
2002 Ford Taurus

1,832 Questions

1998 Ford Taurus
1998 Ford Taurus

1,403 Questions

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85219 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...