2004 Ford Crown Victoria "rear axle" Questions

Ad

...rear axle on a 2004 ford crown vic to replace seal on wheel? Section 05-02A: Axle, Integral Carrier ? 8.8-Inch Ring Gear 1994 Town Car, Crown Victoria/Grand Marquis. Workshop Manual REMOVAL AND ...

Ad

Question about Ford Crown Victoria

2 Answers

rear axle look like Your rear axle is the part that runs between the two rear wheels. The shock absorbers and springs are always attached to it. On a rear wheel drive or four wheel drive vehicle there

Ad

...REAR END SPIDER GEARS,PUSH IN THE AXLE TOWARDS THE INSIDE SO U CAN REMOVE THE "C-CLIP" AT INNER END OF AXLE. now u can slide out axle and youll be able to replace seal and if needed axle bearing. let ...

...pulling left and right a bit has new springs and shocks might want to check the rear axle inside the pumpkin make sure everything is tight the check your axle bearings there should be little or no ...

rear axle code. I want to know what rear axle code is comparable to the H9 for a Mercury Grand Marquis? The H9 rear axle code in Ford Crown Victoria seems to get great gas mileage. Want to find a rear

Question about Ford Crown Victoria

1 Answer

rear cover and drain oil from diff, remove abs sensors if it has abs,remove axle shafts, this is done by removing the 8mm bolt holding the pin, slide pin out push axle in to remove c clip holding axle

Question about Ford Crown Victoria

1 Answer

rear axel removal 95 crown vic simple!remove wheels wich ever side remove drums or rotors remove rear pumpkin cover! spin gears til u see an 8 mm pin! remove pin/bolt then slide larger pin out ! k ...

Question about Ford Crown Victoria

1 Answer

how do you replace the rear axle seal Do you need directions for individual axle replacement or replacement for the entire axle housing as a complete unit?

...rear axle removal there are two main designs. One uses a bearing and flange at the backing plate area, release that and you can pull the axle and bearing. the Other design is call a c lock axle. ...

Question about Ford Crown Victoria

1 Answer

How to remove S-shaped clip holding both axles together and c-clip in the rear differential of a 2000 ford crown victoria. remove rear cover ! make sure car is in neutral! ok spin the ring gear and ...

Not finding what you are looking for?
2004 Ford Crown Victoria Logo

470 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...