2004 Ford Crown Victoria "change starter" Questions

Ad

Question about Ford Crown Victoria

1 Answer

change a starter on a 86 crown vick how to change the starter on a 86 crown vick It is not a bad job to do. Unhook the battery and remove the cable from the starter. Then unbolt it. Two bolts with 1/2

Ad

...change it, here are the tips for that: http://www.fixya.com/cars/r5973094-starter_replace its possible to jump the starter at the power side of the starter to see ifit turns. if it does check to see ...

Ad

Question about Ford Crown Victoria

1 Answer

change the starter I just need pics or a diagram of how to change the starter if you fallow the positive battery cable it will connect to the starter, there will be a ground wire that unbolts or clips

Question about Ford Crown Victoria

2 Answers

...is the problem and how solve this problem. Many Thanks this problem is caused by a defective engine starter motor solenoid, the solenoid is part of the starter replace the starter. Change the ...

Question about Ford Crown Victoria

1 Answer

on the starter solenoid that was problematic. If it does try cleaning the connection there. If that works consider changing the starter to one with a threaded post and change the connector on the wire

change the starter on 4.6l You must jack up ,or put on a lift to reach the starter ,if you jack the car up be sure to put jack stands under the frame before you get under it .(safety first always.)the

Question about Ford Crown Victoria

2 Answers

...change out the starter is there any information out there online that I can print out to change it? It sounds like the one way rollers in the starter gear are not holding. The fix is to rebuld the ...

...starter fuse 30A broke, turns out that the transmission harness was burn so i change it , now the car wont start when its cold, but when i start the car directly from the starter relay it crank fine ...

...in a 92 crown vic, I used the transmission that came from the 92 engine which I believe is AODE. I changed the wiring from front to back with wiring that came from a 97 grand marquis. when I try to ...

Question about Ford Crown Victoria

1 Answer

change the starter with the soinoid.. Make sure you unhook the battery first. A trouble light will also be helpful to see what you are unhooking, etc. Have your starter checked like autozone to see if

Not finding what you are looking for?
2004 Ford Crown Victoria Logo

470 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...