...air flowing through the heater core so it can come out heated through your vents. If the iar is flowing somewhere else, your temp blend door is not moving because the bend door motor is bad or your ...
...heater core provides heat from the motors coolant system and transfers it to heat. Then the blower motor takes that heat and blows it into the van. Another possibility is that the cold/warm blender ...
Question about Ford Windstar
...Air flow control is accomplished in the following manner: Primary control is through the function selector knob , mounted on the heater function selector switch, which is part of the heater control . ...
and blower only works for the winshield Possible you have a vaccum leak or blockage.The direction of flow for heat and air is controlled by way of vaccum lines. sounds like it may be yur heater switch
air door may be stuck. I removed a pencil from a heater box before. It had fallen from the dash, down through the defrost vents and jamed the door. Flap that controls the air flow is probably stuck in
...air flow through the heater core for more heat or bypasses the heater core for less heat. Vacuum actuators control the mode doors which direct air flow to the outlet ducts. The mode selector on the ...
air flowing through the heater core is not doing its job. 2- The heater core gets clogged up. 3- The valve to control amount of hot coolant flow to heater core gets stuck. Let's check if the water can
Question about Ford Windstar
...heater will not change air flow direction. Stuck in the defrost position. What can I do to regain control of the direction of air flow? It will be a cable that will be disconnected. or broken. Youll ...
...something that may have fallen. The air flow directional is the flap or door that is inside the base of the duct system that directs the air to the area selected. heater\AC drain pipe may be
Question about Ford Windstar
...heater it blows cold air it does not heat up. 2000 ford expedition Make sure the heater core is in the open position by using the shut off valve and turning it to open. next, you may have a ...
2,720 questions posted
Usually answered in minutes!
1,830 Questions
1,503 Questions
1,212 Questions
1,032 Questions
600 Questions