1989 Ford F 150 "ignition actuator" Questions

Ad

Question about Ford F-150

1 Answer

...the upper actuator rod, the pin that connects it to the lower actuator broke off. Never had any ignition problems, one day it just won't turn off due to broken actuator rod. Hope this helps

Ad

Question about Ford F-150

1 Answer

so you should be able to remove the shroud and manually manipulate the ignition switch since the actuator rod isn't connected to it anymore. That way you can hopefully start it as well as turn it off

Ad

ignition switch actuator arm repair replaced switch key turns on truck but does not turn off or go to acss. . Took off switch under stering wheel . WORKS FINE MANUALY iI have tilt strring wheel these ...

...ignition switch actuator broke. Turn the key on, on top of the column is the ignition switch. It has a rod going to it. Use some needle nose pliers and push the rod to the front of the truck. Good ...

Question about Ford F-150

1 Answer

...Ignition Actuator. Got old broken one out. Not enough room to insert new one in square hole (track) any ideas? Can I cut the new actautor by 3/4 to 1" shorter? Will it still Work? Please advise? ...

...IGNITION KEY, BUT WILL NOT SHUT OFF WITH THE KEY, INSTALLED NEW CYLINDER, SAME THING. NEW CYLINDER TURNS TO ALL POSITIONS. The lock rod is broken inside the column.You have to disassemble it to ...

...ignition switch actuator and the actuator rod by pulling the entire assembly over the end of the steering column shaft. Remove the lock actuator insert, the T-bolts and the automatic transmission ...

...column will have to be removed from truck to replace.Availible from Ford or parts stores--ASK for plastic ignition actuator-metal one is for 1987 to 1991 F150s. Change it cheap and easy to ...

ignition switch actuator broke. very shortly after the ignition switch actuator/rod broke. very shortly after that i couldn't shift past reverse. are the problems related? will fixing one, fix the ...

Question about Ford F-150

1 Answer

...ignition actuator gets loose and fall out of position. This makes it so that the Ignition will turn on and the engine will start, but it will not turn off all the way. If this is the case, the ...

Not finding what you are looking for?
Cars & Trucks Logo

1,066 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Ford F150
2004 Ford F150

2,636 Questions

1990 Ford F150
1990 Ford F150

1,214 Questions

2005 Ford F-150
2005 Ford F-150

1,298 Questions

2006 Ford F-150
2006 Ford F-150

1,038 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...