2004 Ford F350 "bleeding air fuel lines 350" Questions

air in the fuel lines of a 2004 f-350 6.0 liter diesel truck, is there some way to bleed the air off? You can crack each fuel line and have somone crank the engine. Close them up once straight fuel ...

...fuel line and truck wont start there is air in the lines you will need to bleed them out first crack (take loose) the line comming into the injection pump and crank the motor over for a bit this will ...

fuel system l changed the both filters and l bleed it to the filter on the block....but it is still having problems starting...it wants to start but there is still air somewhere.Can you help me out???

...fuel to your injector pump you have to bleed the lines to each cylinder to bleed out the air in the system. If that all checks out then you need to set the timing to 8 deg using a timing light and a ...

...good luck it could be the high pressure oil pump for the fuel system or a faulty fuel injector that allows air into the fuel system causing an air lock in the fuel rail. sounds like a stuck egr ...

...air intake, does it stay running? I would go to harber freight and get a cheap fuel pressure tester and hook it into the fuel line. It hsould be about 40 psi, and hold for about 30 minutes after shut ...

Bleeding the air out can be a pain at times. I highly recommend you have a shop do this for you. A no start at home will mean a tow to the garage I've replaced my own on my 05 F350 without ever having

...bleeding off your fuel overnight. This will require testing the fuel line by using either a Vacuum tester or air compressor and removing and plugging one line end. The line should not leak. Diesels ...

...fuel[READ AND DO REAL CAREFULL]remove top of air cleaner,,a very short spurt of ether,,, 2 START,,turn the key rite over 2 start[don't activate the glow plugs as the ether may burn the tips off the ...

...fuel filter then move on to the injectors loosen the injector line to bleed it one at a time then crank it till no air is coming out tighten that line then do the next one. . Dont use starting fluid ...