1993 Ford F250 "replace distributor pick coil" Questions

...distributor, replace it and it will start, hope this was very helpful. You mentioned that you changed the coil pack but have yo checked the spark plugs itself.If the spark plugs are worn out it needs ...

...replace the distributor coil. If the coil is worn out there will be no spark to the distributor going to the plugs. Once replaced you'll be good. Hope this helps and thank you for using FixYa! Have a ...

...replace the pick-up coil/stator or the entire distributor. You might need a Ford ignition module wrench to remove the ignition module from the side of the distributor and most auto part stores will ...

...replace the pick-up coil/stator or the entire distributor. You might need a Ford ignition module wrench to remove the ignition module from the side of the distributor and most auto part stores will ...

...Modules and pick ups have been a problem on certain Ford models. Check the coil "-" terminal for flashes with a test light when you crank it over. If it does'nt work, then replace the

...replace or reset. Or what can I do? Please help? If you check and test the coil, cap/rotor,distributor pick-up coil, ignition control module the only one left is the brain box (ECM - Engine Control ...

...in the distributor is bad. Also you need to make sure the distributor is turning. If the distributor is not turning, you could have a locked up oil pump, or a bad timing chain. Replace the brain

...piece that holds rotor in place, it has a small wire coming out of it. If you don't want to deal with the hassle then just replace the distributor, try one from a junk yard see if it works. Good

no start replaced distributor, ignition module. No spark Make sure it has not jumped time,and if it has not,replace the pick up coil in the distributor.

...ignition coil. If the test light stays steady and does not flash when the engine is cranking over, then the pick-up coil inside of the distributor is bad and you should replace it or the