1993 Ford F250 "fire starters" Questions

Ad

1993 ford f250 will not start, no fire or spark truck has set all winter, problem being the starter went out, changed the starter...no start, no fire....since then ive changed the distributor, cap, ...

Ad

Question about Ford F-250

1 Answer

...fuel saftey button pushed... Now what do we check this trucks starter has the starter coil on the fire wall find it and try jumping the terminals to see if the motor will turn ...

Ad

Question about Ford F-250

2 Answers

Every so often when I try to start my 2005 F250 the starter will just spin. In every case so far when I try the second time, it will start ok. If the starter is spinning without engaging the flywheel,

...the starter is on the way out.if starter does not crank it may already be shot.srarter relay is on fire wall check power + ground. try pulling off and cleaning your battery terminals, i had this ...

Question about Ford F-250

1 Answer

2007?; 4.6 no fire Did a motor swap now no fire make sure crank sensor is plugged up.. Make sure small wires on starter are hooked up coil electric and ECM power comes from starter wires. Check too ...

Question about Ford F-250

1 Answer

1983 F250 5.4 liter won't start Truck turns over (starter engages) but doesn't seem to want to "fire". The weird thing is that while turning the key its like we aren't getting anyh spark but just when

Question about Ford F-250

1 Answer

hi i have a 1975 ford f250 with a 390 4 barrel double pumper.my firing order is how it should be a new battery and starter but when i start the engine it slightly turns then stops what can be ...

Question about Ford F-250

1 Answer

wont fire.i have replaced control mod,distrib,coil,cap&roter,voltage reg,silinoid and starter and it still won't fire.1979 ford f-250 with a 400 motot. what is wrong????????????? Do you have a ...

Question about Ford F-250

1 Answer

...please help! Truck is 1988 F250 4wd with the 7.5L 460 engine Replace the starter solenoid on the fire wall. If you jump it and still no turning. replace the

The problem is that you have to push the clutch all the way in to get the starter to fire. There must be a switch or something that lets the ignition fire the starter. Well, the starter won't fire now

Not finding what you are looking for?
1993 Ford F250 Logo

391 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...