1999 Ford Taurus "igniter test" Questions

Why won't my 1990 Ford Taurus spark? Ran out of gas, tried to restart many times- cranks but won't start, turned hazards on, returned filled gas- plenty, batt. now dead, charged and jumped

1993 ford tarus 3.0 engine had weak spark after changed coil fired a couple of times know no spark? any ideas Using a volt meter disconnect the electrical plug to coil and check with key on to be sure

where abouts is the igbition switch located on a ford taurus 1996 Inspect/Test/ReplaceThe ignition switch is usually mounted to the steering column and is operated by a linkage rod.NOTE On ...

I have a 90 Ford Taurus SW 3.0L I am getting No Power from ignition nor power inside the car. What is going on. We replaced the ignition solenoid and notice that a fusible link line was melted that ...

I am having two issues with my 2001 Ford Taur, the first is a code of P0715 and the other is P0302. We have replaced spark plugs, fuel filter, oil change and the car still sputters and is very ...

My son has had three starters replaced in the last year in his 2004 Ford Taurus. I would not think that is the problem. His car will not start today. Could it be he needs another starter, numbe four, ...

2000 Sable sedan - which fuse is brake lights? Don't have manual. USE A FUSE TESTER, TEST ALL THE FUSES, UNDER THE HOOD & INSIDE THE CAR. THERE ARE TEST POINTS FACING OUT ON THE FUSES. THEY CAN ...

2006. Why doesn't it start due to (anti-) theft system? Ran every test. Checked all fuses/relays..Tried to use key and transmitter to reset but doesn't work, also have disconnected battery terminals. ...

I have no spark in my 1990 ford taurus. Am I right to think it is the crankshaft position sensor/ camshaft position sensor, EEC, or the wiring between them based on the details below? If yes, where ar

Where is the ignition control module located on 4 Ford Taurus 3.8 engine a how do I replace it Hi Tracie , there is no ignition control module . The PCM controls the coils . You would need to check ...