...main issues that will cause the engine to knock. The first will be the oil pump. If the oil pump is failing, or damaged, this will produce a low oil pressure state. Low oil pressure will cause the ...
...the main crankshaft caps and remove the crankshaft. Just about all crankshaft repair must be done by a machine shop to ensure that bearing clearances and surfaces are properly measured and
Question about Cars & Trucks
...MAIN BEARING BOLTS 60 - 70 FT LBS, CRANKSHAFT PULLEY BOLT 85 - 100 FT LBS. MAIN BEARING OIL CLEARANCE .0005 - .0022 CONNECTING ROD OIL CLEARANCE .0008 - .0015 / SHAFT END PLAY ...
main bearing cap bolts The torque speic for the main bearing caps on a 2.2 are 105 nm or 77 ftlbs all. But you know if your doing the crank there is a lot more to it then the torque . The main bearing
Question about Cars & Trucks
...,TRY RINGING CUMMINGS 03 9765 3222 or 03 9360 0800. Good luck....Cummings 6B, 6BT, 6BTA Main Bearing bolts 176 Nm, 130 lb.ft. Con rod 102 Nm, 74 lb.ft. Cylinder head bolts 126 Nm 93 lb.ft ...... ...
Question about GMC Cars & Trucks
...bearing clearance chart for rods & mains on 2010 GMC Acadia -SLE AWD 3.6L I have never seen a chart for such purposes - usually it is taken as read the clearance with new bearings and new crankshaft ...
...Main bearings at 80 foot lbs. rod bearings at 30 foot pounds. Make sure you check clearances with plastigage before you button it up and light it. Anything out of clearance may require an over or ...
Question about Ford Explorer
...main bearing torque specs for a 96 chevy S-10 2.2? 1996 , S-10, 2.2 The torque spec for the main bearing caps on a 2.2 are 105 nm or 77 ft lbs all. But you know if your doing the crank there is a lot ...
...main bearing clearance,crankshaft run out, connecting rod journal diameter and maximum allowable taper/out of round for it. Main bearing journal diameter and Maximum allowable taper/out of round for ...
main bearing clearance ROD AND MAIN BEARING CLEARANCE its in the fsm. G13 or G16 engine. they had 2 choices in 1989>? G16. (all steps are here, as is link to real FSM) http://www.fixkick.com/engine
3,360 questions posted
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,302 Questions
1,513 Questions
1,369 Questions
