1998 Ford Explorer "brakes clean" Questions

brake lights dont work Have replaced brake light bulbs, and checked fuses and brake lights dont work, all other lights do work. check brake light switch..under dash up at top of brake pedal.with ...

...Clean around the old brake lines carefully before removing them to prevent any gunk or debris from getting into the brake line connections. Remove the brake fluid reservoir cap, cover it with some ...

...The running light use less electric and if the ground is weak you will get no lite. sometimes the brakes will work some what as they will backfeed or get some juice. fuse 27 in the underhood

abs warning ligt on.what should i check first what sould check first look at the brake fluid.see that its lowered.then the brake pads, see if there's enoucht friction on it.on the other side you see ...

...clean fluied You mean just out of the reservoir? Yes, I do it all the time, you can **** it out of the whole system, but you will have to bleed the brakes before going again. The car doesn't mind ...

mass air flow sensor cleaning need to know how best to clean my mass air sensor BRAKE CLEAN WORKS GOOD.CRC GREEN CAN!!

1998 Ford Explorer brake problem I have a 1998 Ford Explorer Sport. After changing out my front driver side brake disc, I am having a problem with my brake caliper. I think one of the pistons does not

1996 explorer brake lights flicker and its hard to shift 1996 explorer brake lights flicker Bad grounds. clean the contact... its this a good 70% of the time...

brake lights don't come on when I step on the pedal you've got either a brake switch or fuse or ground issue. the brake switch is located above the brake pedal. there are two wired going to it if i ...

...clean a rediculous amount of brake dust off of the rims and most of the car. What is the deal.....I was thinking it was the brakes maybe cause it still has the brakes the dealer put on them. Is it ...