1988 Dodge Daytona "reverse servo position" Questions

Ad

...reverse from instructions code 34 Speed Control Servo Circuit. No check engine light will post. Your cruse control servo is not turning on and off like it should. I would do the tps first then ...

Ad

...Reverse Band and Servo No apply or slipping Servo Piston (69) Broken or binding Servo Piston Seals (71, 72) Leaking Servo Pin (67) and Springs (66, 68) Binding Servo Cover (73) Broken, loose, or ...

Ad

...Reverse Band and Servo No apply or slipping Servo Piston (69) Broken or binding Servo Piston Seals (71, 72) Leaking Servo Pin (67) and Springs (66, 68) Binding Servo Cover (73) Broken, loose, or ...

Question about Dodge Daytona

1 Answer

...is stuck. This is why my second recommendation was to shift to Reverse, which was an attempt to unload pressure on the Servo stem, to free it. I hope my solution is helpful in solving your

reverse and has trouble shifting gears when taking off from stop position. What could be the problem check the oil level in the transmission first. Have a pressure test done on the transmission to see

Question about Dodge Daytona

1 Answer

reverse servo piston. If the VSS is defective (thus reading 5 mph or above on your scan tool), the PCM will command low line pressure, thus not feeding oil to the forward/reverse servo piston. In turn

...reverse as well as letting it sit in the garage overnight. What is prob? It your 4 wheel drive servo.. Your vehicle is reading that it's in 4 wheel drive all the time. Simple solution= unhook your ...

servo might be responsible for shifting from 1 to 2 but is the reverse shifted mechanically. If you are going to just replace the valve body then there is no need to remove the transmission. All other

...reverse band adjustment. you need special tools like t59p-77423-A IS A TORQUE WRENCH and T59P-77409-A IS A HOLDING TOOL AND THICKNESS GAUGE. you need to drain the transmission oil, not the ...

Question about Dodge Daytona

1 Answer

servo is set at 4L. So my question is can I drive it like this? there felt like spring tension on the shaft that "ckicked" into each position 2WD, 4WD, 4L, but I don't want to be driving down the road

Not finding what you are looking for?
Cars & Trucks Logo

40 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...