...key turned to start.( if not, may be caused by bad ignition switch but that is rare) Your ignition coil cannot make spark 'till the engine is actually spinning.(turning, cranking) Once it's running ...
...key in ignition, panel lights will come on and windows will work, but car won't start every time. sometimes will start after wait a while, sometimes if let car roll backward in reverse a little, ...
key in ignition spins then engages key in ignition spins then engages You have either a worn key or a work ignition barrel.You need to try a new key first and if the fault persists, replace the ...
...ignition is messed up, when i put the key in all it does is turns and turns "spinning"....I had to pull a fuse just turn the car off and then disconnect the battery so it wouldn't go dead....can you ...
...ignition problems might be a key issue but when i put key in door it will spin clock and counter clockwise all the way around and then when i put it in the ignition it wont turn and stops --i have to ...
Question about Ford Focus
...Ignition key lock cylinder just spins, with or without the ke The lock cylinder just spins, with or without the key. Without the key, the inner function does not work so good, but after you spin it, ...
Question about Ford Focus
...key turns in ignition but doesn't seem to engage, no lights come on either a day or 2 before it happened i would have to push lock cylinder in while turning key & it would work. Then it just ...
ignition switch, key still spins to the left and the right, all lights come on When turning off and on your PC, hold in the F8 key to start the computer in safe mode. ---------------------------------
Question about Ford Focus
...ignition switch from the key lock cylinder, or the ignition switch is defective. The starter has a gear in it that when the key is turned, the gear goes forward on a shaft, engages the flywheel, and ...
...and afterwards no problems w/ ignition, but then key would not go in. This is a 1992 Ford Ranger. the ignition switch is bad if the silver part spins all the way around. you will need to replace
3,753 questions posted
Usually answered in minutes!
3,749 Questions
2,055 Questions
1,226 Questions
897 Questions
840 Questions