1999 Ford F350 Regular Cab "codes" Questions

how do i reprogram keyless entry codes door pad keyless codes? in owner manual, enter permanent code and then press "1" and enter personal code, then press "1" again. Then both codes will work. If you

Shift Solenoid D Performance or Stuck Off. Check in THIS LINK the test and solution procedure. Both codes are related to the Direct clutch (5th gear). Code 2703 states to change out the solenoid (SSPC

showing trouble codes, 1249,0470,1211. What are these codes? CODE PO470 / EXHAUST GAS PRESSURE SENSOR CIRCUIT MALFUNCTION. CODE PO1249 / WASTEGATE NOT DETECTED. CODE PO1211 DID NOT FIND.

1996 ford 7.3 diesel trouble code p1661 code keeps reappearing when the motor is shut down. It will crank everytime I clear the code, but the light comes back on and the motor shuts down. can I clear ...

...settings and fired the engine up in order for the ECM to read/function then downloaded the Engine codes. Only code that identified was the P0603. I'm not showing any other codes. I'm baffled

...to an error with the pintle position. Your first port of call is to go back to whoever read the codes out and have them reset using this procedure:- Switch off the ignition Disconnect the wiring ...

...a p 1249 code and a p 0475 code p0603 code on my f350 diesel.plugged it in on a odb2 scanner no codes but they show up on my hyper tech programmer i reset them and they come back whats up if your ...

air bag light blinking air bag light, what does it mean? It means that there is a problem with your air bag. It should be blinking a code. Count the blinks. In otherwords it should blink twice, pause ...

...your car plugged in to a fault code reader, they will attatch to your OBD plug and rear your fault codes from there. Once codes have been cleared and fault diagnosed the light will be ...

abs light blinks 16 times brake lights dont work 16 is a pass code. For some reasom your diagnostic connector is in test mode. If light flashes, diagnostic circuit is grounded. CORRECT condition. If ...