1996 Dodge Neon "cam position sensor" Questions

Ad

Question about Dodge Neon

1 Answer

...cam position sensor intermittent 0340 cam position sensor failure I would replace the cam position sensor from the codes you provided. The knock sensor would most likely be related to the sensor ...

Ad

Question about Dodge Neon

1 Answer

...for the camshaft position sensor,and the crankshaft position sensor Hello kriswdorsey, Below are pictures of the cam position sensor and the crank position sensor. I hope this helps. Regards, ...

Ad

...cam shaft position sensor. The car now runs but the service engine stsays on and when I use the anitizer it says the code is the cam shaft position sensor. So What can I do to correct this ? ...

...Cam Position Sensor on Dodge Neon ... ? 10:33 https://www.youtube.com/watch?v=ciCPQ0kVAQY Dec 21, 2012 - Uploaded by VeeTheAmazingGreek ... had to change out the cam position sensor on my 2001 Dodge ...

...decelerate.have replaced ECM, cam sensor, crank sensor, throttle position position sensor, coil and wires, and wiring harness. Have you checked for vacuum leaks? What do you mean by "normal

Question about Dodge Neon

1 Answer

Position Sensor and might as well replace the crankshaft sensor as well. With these codes and the symptoms you describe this should clear the problem for you. Also check the wiring harness around both

...cam sensor problem? my check engine light came on and my car started puttering when i gave it gas. My body had a diagnostic tool and we figured out that it was ether the cam shaft sensor or the crank ...

Question about Dodge Neon

2 Answers

...cam shaft is out of timing... does the position sensor need to be replaced or do i have to re-time the car????? usually when that code comes on after a belt change its because the cam or crank gear ...

cam position sensor and their is no power to the cam sensor. what am i forgeting to check? what would stop power getting to the cam sensor? if you could just post a wiring diagram for me that would be

CAM sensor too. The crankshaft position sensor is in the engine block behind the alternator / just above the oil filter. See diagram below. Clean it real well and check the wiring. Also make

Not finding what you are looking for?
1996 Dodge Neon Logo

534 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Dodge Neon
2002 Dodge Neon

861 Questions

2004 Dodge Neon
2004 Dodge Neon

762 Questions

2003 Dodge Neon
2003 Dodge Neon

743 Questions

2005 Dodge Neon
2005 Dodge Neon

710 Questions

2000 Dodge Neon
2000 Dodge Neon

606 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...