...adjust the clutch clutch seems to work ok, but pedal is very high with little free play at the top if you have a hydraulic clutch there is probably no adjustment. it might help to bleed the clutch, ...
...ADJUST WITH A STOPPER LIMITING THE UPWARD TRAVEL OF THE PEDAL.PEDAL FREE PLAY IS ADJUSTED AT THE MASTERCYLINDER PUSH ROD.IF PUSH ROD IS NON ADJUSTABLE FREE PLAY IS ADJUSTED BY PLACING SHIMS BETWEEN ...
...adjust it? Thanks. Ted Clutch ADJUSTMENTS 1997-98 Models CLUTCH PEDAL HEIGHT The clutch pedal height should not be a periodic adjustment but may be checked after components of the mechanical clutch ...
...Adjust the brake pedal pushrod so there is a small clearance or free play in the brake pedal linkage equivalent to a couple of millimetres of free play on the pedal. It is then extremely important to ...
Question about Dodge Rampage
Brake Pedal Height and adjustment on a 1996 Chev. Z71 Brake Pedal needs to be adjusted up, need to know the Specs. on the floor to Brake Pedal Height and the free play in the Pedal ? Thanks ! Why lol?
...brake pedal on my 2008 Land Cruiser has too much travel before braking action starts. The brakes themselves are very good, but the delay leads to late braking and could be dangerous in an emergency. ...
Question about Dodge Rampage
brake pedal position sensor on 2006 cadillac cts there is an adjustment under the dash that has a rubber bumper on it . Check that the rubber is still there . adjusting this stop moves the pedal up or
Question about Dodge Rampage
...adjust the brake switch position correctly on replacing the switch of course the lights will not come on the brake pedal should have about 1" movement before the brake rod pushes on the m/cyl piston ...
...adjust park brake pedal assy. I've replaced the brake shoes and left and right park brake cables. The problem is the park brake pedal is all the way up aguinst the rubber stop but the park brakes act ...
Question about Cars & Trucks
...free pedal ( distance from initial movement to when the pedal rod touches the piston this should be around 1" measured from the floor to the pedal . It is adjustable at the end of the rush rod ...
40 questions posted
Usually answered in minutes!
2,271 Questions
2,049 Questions
1,788 Questions
1,616 Questions
1,496 Questions