1999 Buick Century "replace multiple turn signal" Questions

...turn signal switch has multiple functions. i have to hold the switch to keep the bright lights on to drive at night. cruise control stopped working to. can anyone help me? no low beams on my 1999 ...

multiple times on GM vehicles. Now I know about it too, and I'm sharing it to hopefully save somebody else some grief. do you have a trailer lighting plug on it??? If you do take it off and replace it

turn signal switch, no signals. Hazards still work so the bulbs are fine. Checked the fuses multiple times Hi, The flasher relay would be in your fuse box, under the dash at the driver side. You could

multiple function turn signal switch. A couple things to try With your foot pressing on the brake pedal, Press the four way flasher button up and down, press and hold it down, pull up on it, or wiggle

...replace. Sounds expensive to me. Coud this be right? Has no flasher module , uses SJB - smart junction box . FORD'S BCM - body control module . The smart junction box (SJB) monitors the multifunction ...

...turn signals, it is usually multiple issues. Maybe your driving lights quit too? and maybe you windshield wipers? Start out by running a ground wire from the engine to the firewall; maybe attach (to ...

...multiple fuses and relays. Could not identify signal curcuit. There are two fuses to check, both 15A. One is for the turn signal and the other is for the hazard lights. I think on the 2006 they are ...

...replace it because my car is making an incessant clicking noise, even when the turning signals are not on. I have purchased the part, but don't know where to put it. Because of space constraints. It ...

replace it if necessary. 2. Faulty bulbs: Inspect the bulbs in the brake lights and turn signals to see if they are burnt out or damaged. If a bulb is not working, it should be replaced. It's possible

...multiple-lights-do-not-function-prop... Jul 21, 2012 - 15 posts - ?4 authors (1) Interior does not dim, nor come on (respective to the lights) at ... I've tried replacing my front turn signals and ...