1995 Buick Regal "connect wires meter 100 amp" Questions

...100 AMPS as measured by an inductive ammeter on the battery cable when starting, and it does NOT start, then it's a bad starter. However, if it does start, that's normal. On a car that old, I would ...

...connect a voltage meter a. ground to cars body, b. pos to battery terminal) if the wiring is fine then the only other possible thing is the MAIN FUSE. this fuse is located in the fuse box and is ...

...meter ( ohms or continuity ) from ground to the wire leaving the hood switch one direction you should have an open the other you should have < 100 ohms ). I suspect the hood switch is OK, if the ...

...100% dark,. all doors open , hood and trunk? called dark current checks. and you are correct ,most fuses have many loads. some are 20 or more. (now windows ,usually) DOME (im logged in to alldata.com ...

...meter end of the probe is in the right connector. Connect the positive probe to the battery. Connect the negative probe to the red cable that is still connected to the vehicle. Make sure this cable ...

...meter (see below) to find if your OPEN. ALTHOUGH it is best to BUY your own... Your schematic (wiring) diagrams are available (free) from BBB Industries (also "some" at autozone.com... not quite as ...

...meter to show how much amp draw is taking place as it is charging and you'll have to determine that from observation. MOST important parts: It is best to disconnect the battery you are charging, at ...

...connect my 2 meter leads one to battery lug plus and other black lead to car body metal (not engine , the body) 0.5vdc max, with HL on. if higher your body to battery ground is bad. test 3 : this is ...

connect the meter to battery NEG lug (black test lead tip) connect read lead to engine, metal.. meter reads zero key on, meter reads zeo of not below 0.5vdc (ground spec) grounds are NO GOOD . now put

...meter connected, I have yanked and wiggled all wires from the dash to the alternator with no voltage change. Tried running a wire directly from the battery + post to alternator terminal 1 with no ...