1999 Chevrolet Lumina "2005 equinox head bolt" Questions

Ad

2005 to power the Chevy Equinox. Over the years, GM has saved a bundle on manufacturing the 3.1L engine by using the production line tooling it originally developed for the 2.8L V6. By simply changing

Ad

Equinox-2005-2007-Torrent-2006-07/Engine-Mechanical-Components/Cylinder-Head/_/P-0996b43f80cb1b76 try here.... https://www.autozone.com/repairguides/Equinox-2005-2007-Torrent-2006-07/Engine-Mechanical

Ad

2005 Chevy equinox rod bearing torque specs on a 3.4 liter Rod Caps - Tighten in two (2) Steps: 15FtLbs; +75 degrees of bolt head rotation. New bolts should be installed as these are one time use ...

replacing front wheel barings on a 2005 chev silverado. need torque specs for 3 mounting bolts and torque spec for shaft nut through center of bearing (spline gear) the big one tighten with a big bar ...

Question about Cars & Trucks

2 Answers

...2005 Chevy equinox with a 3.4 l v6. I was putting in the pushrods and rocker arms and busted a bolt off on one hand and couldn't get the bolt out. I had another set of head so I decided to swap the ...

Question about Chevrolet Lumina

1 Answer

bolt found on the front of rocker panel behind the front-left wheel then use a flat screwdriver or clip removal tool to pry open the black plastic **clip's 'dime-sized' head prior to pull out the clip

Question about Chevrolet Lumina

2 Answers

...EQUINOX It is not necessary to remove the entire grill, just the chrome trim piece that extends across both head lights. Use a small flat screwdriver and delicately pry the trim piece towards you. It ...

Question about Chevrolet Lumina

1 Answer

...head lights. Use a small flat screwdriver and delicately pry the trim piece towards you. It is held in place by several small plastic tabs that are located across the entire back side of the trim ...

...head lights. Use a small flat screwdriver and delicately pry the trim piece towards you. It is held in place by several small plastic tabs that are located across the entire back side of the trim ...

...on 2005 chevy equinox 3.4 liter You tighten the bolts in three steps, 22ft lbs--44ft lbs--then turn another 95 degrees.
On the comment box, I posted another link, larger, easier to

Not finding what you are looking for?
1999 Chevrolet Lumina Logo

933 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...