1993 Buick Regal "remove lock plate" Questions

Ad

...the steering wheel (need steering wheel puller. remove lock plate (need lock plate removal tool) under the lock plate is the switch it kind of looks like a horse shoe with many wires going to

Ad

...remove the lock plate which locks the steering when the key is removed. this takes a special tool a ( lock plate remover / installer ) the lock plate is held in place by a small retaining ring , but ...

Ad

Question about Buick Regal

1 Answer

remove the lock cylinder retaining screw, and remove the lock cylinder. Remove the dimmer switch nut/bolt, the dimmer switch, and the actuator rod. Remove the dimmer switch mounting stud (the mounting

Question about Buick Regal

1 Answer

...u will see black cover remove 3 tork screws.remove. next u will need a special tool push dowd on plate . remove clip in center. lift turn arm . remove bolt for lock cly. turn key lock will slide ...

...remove the air outlet trim plate. If may be secured with screws/bolts or clips. If accessible at this time, detach the switch electrical connector. Remove the switch, using one of the following ...

lock collar then remove the signal switch plate.....on the left side of the steering shaft there is a single screw remove it and the ignition switch will slide out(you may need to rotate the switch to

Question about Buick Regal

1 Answer

lock and cycle the key in and out a few times and see if it will free up. the next thing you can try is to look at your key and see if it looks worn,, if it does then you can have a locksmith shop try

...plate light, blinker, both back lights, and my runners) Now im thinking maybe electrical?? Anyone know what I can check to fix it?? My dad used to be a diesel mechanic in the military and it baffeled ...

...nut to the steering wheel Remove the lock plate retaining ring then the lock plate with a lock plate compressor Remove the directional switch Remove the torx style bolt Slide out the lock ...

PARTS STORE.SEE WHEN YOU COMPRESS LOCK PLATE YOU HAVE TO REMOVE THE STEERING SHAFT SNAP RING.YOU NEED TINY SMALL FLAT HEAD SCREW DRIVER AND TINY PAIR NEEDLE NOSE PLIER THE LOCK RING IS HARD TO GET OUT

Not finding what you are looking for?
1993 Buick Regal Logo

472 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Buick Regal
1999 Buick Regal

757 Questions

1995 Buick Regal
1995 Buick Regal

631 Questions

1998 Buick Regal
1998 Buick Regal

489 Questions

2000 Buick Regal
2000 Buick Regal

420 Questions

2001 Buick Regal
2001 Buick Regal

426 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...