...chevy truck 350 wouldnt pass smog but was running good.new cat, spark plugs and wires with cap and rotor. now its running like **** and smells like a flooded engine and the engine light came on . ...
...350 with no fuel pump and no injector pulse installed new pump relay and checked all wiring as well as changed the two tbi injectors The fuel pump circuit and injector circuits are fed by two ...
Question about Chevrolet 1500
chevy truck with 5,7L 350 will start but wont stay running. put new fuel pump and relay switch in it will fire and run for a few then die, let set a min and it will fire again and run for few then die
Question about Chevrolet 1500
Chevy K1500 with a 350 and it runs rough from time to time and has a mis fire on #6 The truck has 225K miles on it, and runs great and then out of the blue it will act like it is running on 6 of the 8
Question about Chevrolet 1500
...its the control module i have seen them where there slighly cracked and when the motor is hot they malfunktion my truck runs great chevy 350 but when you go to drive it bogs down almost stalling ...
...chevy pu, 350 sbmall block edelbrock carb, problem is ruff & idle miss grey smoke out exaust, any idea? That engine is a good solid workhorse that isn't difficult to set up. First, set the ...
...wiring diagram for 350 chevy 1980 Complete 73-87 Wiring Diagrams - 73-87chevytrucks.comforum.73-87chevytrucks.com/smforum/index.php?topic=11766.0Apr 8, 2009 - 1 post - ?1 authorHere are the complete ...
Question about Chevrolet Cars & Trucks
chevy 4x4 350 engine 350 trany. Will not go in gear I have A 1977 chevy with 350 and 350 turbo trany. This is going to sound crazy. But I changed the power steering pump. I have to climb up into truck
...Chevy Cheyenne, K2500 4x4 350 Vortec. I have replaced the distributer, cap, rotor, plugs, plug wires and ingnition coil. It still has a slight hesitation at start up and seems to worsen as the engine ...
Question about Chevrolet 1500
chevy 350 that is backfiring through carbourator. Tried everything, three different mechs cannot solve. Please help, Regards, Andre I have the MSD distributor, coil and wires. Edlbroc carb. I have two
387 questions posted
Usually answered in minutes!
878 Questions
795 Questions
754 Questions
575 Questions
561 Questions