1988 Chevrolet K1500 "remove pick coil distributor" Questions

...remove the ignition module and have it tested for free at most auto part stores. If the ignition module does test out alright then the problem could still be in the pick-up coil/stator, (it can be ...

...remove the ignition module and have it tested for free at most auto part stores. If the ignition module does test out alright then the problem could still be in the pick-up coil/stator, (it can be ...

...the coil. What else could it be? Replace the pick up coil in the distributor,they are bad to go out.Also,while you are in there remove the ignition module and have it tested,to make sure it is

...Remove this module and there is a part number on it. Take it to your local Chevrolet dealer and they will give you the correct module to replace it. Make sure you put a layer of die electric grease ...

pick up, what is the firing order? Hi my name is David =d_hubbs . Your Firing order is 1-8-4-3-6-5-7-2 Clock wise Rotation. NOTE make sure you know where your #1 Wire starts at on the Distributor Cap.

pick up inside the distributor time to rebuild it (not the cap and rotor) the little thing inside with all the wire wrapped around something- copper wire with a clear coating on it the coating get hot

remove the ignition rotor, and then simply un-plug the wire connector to the the pick-up coil/stator and then lift it straight up and away from the distributor, and when re-installing the pick-up coil

...pick-up coil/stator is easily replaced in a dodge distributor, and once you have removed the distributor cap and the ignition rotor, then just dis-connect the wire connector from the pick-up ...

...remove the pick up coil from my 1991 caprice distributor in a 305 engine Hi, In order to remove the pick up coil, the distributor must be removed, once out, take the roll pin out of the gear, and the ...

...pick-up coil, you need to remove distributor (mark where rotor is pointing first) Then you need to remove pin in cam gear on end of shaft to remove gear so you can remove shaft from housing. Then you ...