...power wire when key is on. If not, check fuse and check wiring. The other wire on the injector connector is the ground wire going into the computer. To check the injector ground, clip a test light ...
...power the pink/blackwire for 3 seconds (10 secs apart) each attempt. If the test probe illuminates each key cycle,it gives you an accurate diagnostic for your symptom and you can proceed with fuel ...
...probe both ends of the fuse. A bad (blown) fuse will only light the testlight on one end of the fuse. A good fuse will turn on the light at both ends of the fuse-meaning the fuse is not ...
Question about Hyundai Cars & Trucks
...power windows not working fuses are good Usually a bad switch pack or broken wire on the drivers door where the bellows looking boot protects the wire. When the door is opened and closed over the ...
Question about Cars & Trucks
...power to and through them. The tops of all fuses have two slots on the top-one at each end. these are test ports and open to the metal strip inside the fuse. Touch the needle probe of a test light ...
...probe to touch both ends of the fuse, first one end and then the other end. A good fuse will light tester on both ends of fuse-meaning the element inside has not blown. A bad or blown fuse will only ...
...power to the switch and test the switch controls by back probing the wires and activating the switch. sometimes its trial and error. If that is all good, then the window motor is at fault and needs ...
Question about Cars & Trucks
probe all the terminals in the connector. One wire should be the hot wire to the switch-hot at all times-just waiting for the switch to send power out to make things work. If you have a hot wire there
Question about Chevrolet 1500
...apart you will need torx security which you can get at harbor freight for about five bucks for the little folding thing with eight sizes. I had a very similar problem with a very similar vehicle if ...
...probe to other end of fuse and see if power there. Keep on until your tester lights up when touching the little port on the fuse. Got it? Okay, now with every fuse, you need to touch tester to both ...
387 questions posted
Usually answered in minutes!
878 Questions
795 Questions
754 Questions
575 Questions
561 Questions
