1986 Chevrolet Suburban "caliper sticking truck" Questions

Ad

Question about Chevrolet Suburban

1 Answer

...back brakes locking in reverse It sounds like your back brake pads are worn or the rear brake calipers are sticking if this is the problem you will need to buy new calipers. Good

Ad

...in reverse. Whats going on? Sounds like you have sticking caliper pistons, have you ever changed brake fluid? Replace calipers and flush brake fluid and clean ABS sensors with ABS safe brake

Ad

...feels like it is coming from the front . Sounds like warped rotors that are siezing up due to your calipers

...caliper for pressure when the brake pedal is applied. You may have a sticking piston in one of the brake calipers. This will cause a spongy pedal. Hope this helps,let me know how you get on. Thanks ...

...caliper is sticking. OMG all these vague WRONG answers. This problem is either Control-arm bushings or tie rod ends. Tie rod ends are critical safety issues. Control arm bushings not so much but ...

Question about Chevrolet Suburban

1 Answer

truck, and check the DC voltage at the battery. if it is under 13 volts, the alternator has turned to toast from the neglect. In it is over 13 volts, the alternator is ok. In either case, now would be

Question about Chevrolet Suburban

3 Answers

...Watch for Chinese front brake hardware. There is an issue with the finish demensions. The brake caliper tubes are too large diameter. Calipers stick. Use made in US only brake hardware and ...

Question about Chevrolet Suburban

2 Answers

...1.8 hatchback Is the piston sticking in the caliper or is the caliper sticking on the outside slides preventing it from moving to the disc? how to take off calper from 1993 f 250 4x4 front disc ...

Question about Chevrolet Suburban

1 Answer

...caliper is sticking or pads are sticking ,proportioning valve with vehicle jacked up and supported and wheel removed inspect pads and rotor for damage excessive wear if good- turn hub/rotor by hand ...

...caliper and determine if it is sticking on the slide or is the piston sticking. If it is the piston you would have to rebuild the caliper or replace the caliper. If it is the slides, you need to sand ...

Not finding what you are looking for?
Cars & Trucks Logo

64 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...