2006 Chevrolet Silverado 2500HD 2WD "blower working high" Questions

...blower motor was working on different settings (high/low) if you played with the switch. When you played with switch trying to get it to come on you could hear clicking under the glove box. The heat ...

...working. I do have the 4 lower speeds The switch, high blower speed relay or the wire harness at the blower motor has gone bad. The highest setting 5 has no resistor, so the blower runs on high but ...

blower motor does not work on high. motor would not work at all. changed out the resistor and all but high (5) will work. Hello, you will need to replace blower control resistor mounted under the ...

...words setting 5. Settings 1 - 4 work fine. Just a fuse? Yup. Refer to your owner's manual for location. The HIGH side of the blower is fused on it's own circuit, usually a 15 AMP fuse. Good Luck . .

blower switch #5 not working. Only 1 thru 4. When I select the high fan speed on the A/C the blower stops. The fan only blows on the other lower selections. I have checked the owners manual for blower

settings 1-4 but works fine on high(5). Is this the blower resistor? yes it is sometimes located under dashboard underneath passenger side. ask dealer for price then try bying it on ebay much cheaper.

high. Otherwise, no air comes out at all. Help? your blower resistor is bad look under rt side of dash by the blower motor you will see a flat plug into a piece bolted in air box this is the resistor.

I own a silverado 2004 4x4 2500 ls crew cab and the in cab fan only works on high (#5) What can I do?? replace blower motor resistos

...high independent from where it is controlled from. look in the fuse panel there is a fuse for blower high and blower low check the one for blower low the location is on the inside of the fuse box ...

...HIGH BLOWER . IF THE RESISTER WENT OUT YOU WOULD STILL HAVE HIGH SPEED BECAUSE THE HIGH BLOWER WAS CIRCUT IS PART OF THE RESISTER ASSEMBLY. IN THE RESISTER ASSEMBLE THERE IS A THERMAL FUSE THAT IS IN ...